×

Warning

JFolder::create: Could not create folder.Path: /home/agus1975/watermart.co.id
Key folder in safepath unaccessible

Cartridge Osmonic Hytrex

Print
100% Polypropylene Construction: high purity for demanding Dialysis applications. No lubricants or antistatic agents: high purity, low rinse up time. Integral Lengths: no stacking required and reduced chance of bypass.
Description

100% Polypropylene Construction: high purity for demanding Dialysis applications. No lubricants or antistatic agents: high purity, low rinse up time. Integral Lengths: no stacking required and reduced chance of bypass. Graded density: traps large particles on the outside, small in the body of the filter. Continuous Manufacturing Process: Assures consistency from one box to the next. Disposability: as there are no cores in Hytrex filters, filters are incenerateable with less then 1% residual ash, (excluding material filtered out in the body of the filter). Low media migration: minimizes cross contamination frequently seen in other types of filters. To order quantities above 3 cases, please contact us Many additional lengths are available upon request. Most common endcaps, closures, and "O" ring types available upon request. ® - Hytrex is a registered Trade Mark of GE Water

Description and Use
The purity and reliability of Hytrex cartridge filters (Figure 1) ensure consistent results, time after time. Thermally bonded micro fibers create a strong secure cartridge that traps particles throughout its depth. Hytrex combines efficiency, long life and purity to create a high performance depth filter.

  • Pure polypropylene construction
  • Fast rinse-up in high purity applications
  • Meets the requirement of the FDA Title 21 of the Code of Federal Regulations 174.5 and relevan subparts of 177
  • Wide chemical compatibility
  • Automated packaging for a clean finished product
  • NSF Standard 42 certified


Typical Applications

  • High Purity Chemicals
  • Bottled Water
  • Pre-treatment for Reverse Osmosis
  • Oil&Gas
  • Electronics

High Dirt Holding Capacity 

  • True-graded density captures particles throughout entire filter depth
  • High dirt-holding capacity means longer life and fewer changeouts which translates to money saved
  • Lower density at the surface of the filter with progressively higher density toward the center
  • No surface blinding, which reduces flow and increases filter hangeouts


Wide Range of Lengths & Adapters 

  • Standard lengths fit most housings—custom lengths can also be provided
  • Wide range of polypropylene end-adapters including gaskets, extended cores and
  • GE Water & Process Technologies patented self-seal polypropylene springs
  • If required, specify FDA-compliant sealing materials and end adapter

Size

  • 1 Micron 40" PN : GX01-40
  • 3 Micron 30" PN : GX03-30
  • 5 Micron 40" PN : GX05-40
  • 5 Micron 30" PN : GX05-30