×

Warning

JFolder::create: Could not create folder.Path: /home/agus1975/watermart.co.id
Key folder in safepath unaccessible
Back to: Cartridge

GE Cartridge Spun Hydro-Cure

Print
Hydro-Cure® melt blown polypropylene filters are designed for sediment removal from potable water. They are made to provide high flow rates with minimum pressure drop.
Description

Hydro-Cure® melt blown polypropylene filters are designed for sediment removal from potable water. They are made to provide high flow rates with minimum pressure drop. Flow rates of up to 5 gpm per 1 0" length are recommended and should not exceed 10 gpm per 10" length for optimal efficiency. The maximum operating temperature is 125° (52°C). Hydro-Cure® melt blown filter cartridges are made of polypropylene resin meeting FDA regulation 21 CFRL 77,1520 (c) 1.1. No binders, lubricants or anti-static agents are used in our manufacturing process.

Filter cartridges are available in 1, 5, 25, and 50 micron ratings and will fit most standard filter housings. Standard filter lengths of 9.8", 20", 30" and 40" are available. Cartridges are individually shrink wrapped and labeled. Hydro-Cure® sediment filters have the micron rating embossed on the side of every cartridge for easy identification.

Applications Include:
Drinking Water, Reverse Osmosis, Food & Beverages, Hotels, Housing
Complexes, General Industrial Filtration

Product Information

5 Micron - 10 Inch

1 Micron - 10 Inch

10 Micron - 10 Inch

1 Micron - 20 Inch

5 Micron - 20 Inch

10 Micron - 20 Inch

1 Micron - 30 Inch

5 Micron - 30 Inch

MB0509880006

MB0109880005

MB1009880198

MB01200000029

MB0520000009

MB1020000058

MB130000023

MB053000007