×

Warning

JFolder::create: Could not create folder.Path: /home/agus1975/watermart.co.id
Key folder in safepath unaccessible

Structural Tank

Print
Structural has been designing and manufacturing pressure vessels for over 4 decades. In fact, we were among the first to use fiberglass reinforced plastic (FRP) in ourpatented manufacturing process.Structural high performance pressure vessels are guaranteed to provide years of dependable service. Structural pressure vessels provide cost-effective solutions for the most challenging applications. Our pressure vessels are accepted globally as the superior solution for water treatment.

Improve your water treatment system with structural FRP vessels. Easy to handle and install, FRP vessels are available in standard polyester or chemical-resistant vinylester construction depending on your needs.
Description

Benefits & advantages of using FRP vessels

  • 100% non-metallic construction
  • One piece seamless molded vessel with no weld or joints.
  • About 1/3 the weight of steel tanks and can be handled easily
  • Available in standard
  • Polyester or chemical resistant Vinylester construction depending on your needs.
  • Optional custom openings located as per your specifications.
  • Easy to handle and install.

Application areas 
FRP vessels are used mainly for residential and small commercial applications like:

  • Softener
  • Filtration

Material Construction

Material : Polyester, Vinylester

 

Operating Parameters

Maximum Operating Pressure : 150 psi

Maximum Operating Temperature : 120° F Polyester, 150° F Vinylester

 

Design Parameters-Pentair

Safety factor: 4:1 (Minimum burst L1 at 600 psi)
Cycle test: 250,000 cycles without leakage

 

Design parameters – NSF
Safety factor: 4:1 (Minimum burst at 600 psi)
Cycle test: 100,000 cycles without leakage

 

Specifications

 

Diameter (Inches) Top Buttom Sidewall Dome
6 2 1/2" - 8 NPSM 1" or 2 1/2" 3/4" 3/4"
7 2 1/2" - 8 NPSM 1" or 2 1/2" 3/4" 3/4"
8 2 1/2" - 8 NPSM 1" or 2 1/2" 3/4" or 1" 3/4"
9 2 1/2" - 8 NPSM 1" or 2 1/2" 3/4" or 1" 1 1/4"
10 2 1/2" - 8 NPSM or 4" - 8 UN
1", 2 1/2" or 4" 3/4" or 1" 1 1/4"
12 2 1/2" - 8 NPSM or 4" - 8 UN 2 1/2" or 4" 3/4" or 1" 1 1/4"
13 2 1/2" - 8 NPSM or 4" - 8 UN 2 1/2" or 4" 3/4" or 1" 1 1/4"
14 2 1/2" - 8 NPSM or 4" - 8 UN 4" or 6" 3/4" - 1 1/2" 1 1/4"
16 2 1/2" - 8 NPSM or 6" - 8 UN 4" or 6" 1", 1 1/2" or 2" 1 1/4"